Source file src/image/jpeg/scan.go

     1  // Copyright 2012 The Go Authors. All rights reserved.
     2  // Use of this source code is governed by a BSD-style
     3  // license that can be found in the LICENSE file.
     4  
     5  package jpeg
     6  
     7  import (
     8  	"image"
     9  )
    10  
    11  // makeImg allocates and initializes the destination image.
    12  func (d *decoder) makeImg(mxx, myy int) {
    13  	if d.nComp == 1 {
    14  		m := image.NewGray(image.Rect(0, 0, 8*mxx, 8*myy))
    15  		d.img1 = m.SubImage(image.Rect(0, 0, d.width, d.height)).(*image.Gray)
    16  		return
    17  	}
    18  
    19  	h0 := d.comp[0].h
    20  	v0 := d.comp[0].v
    21  	hRatio := h0 / d.comp[1].h
    22  	vRatio := v0 / d.comp[1].v
    23  	var subsampleRatio image.YCbCrSubsampleRatio
    24  	switch hRatio<<4 | vRatio {
    25  	case 0x11:
    26  		subsampleRatio = image.YCbCrSubsampleRatio444
    27  	case 0x12:
    28  		subsampleRatio = image.YCbCrSubsampleRatio440
    29  	case 0x21:
    30  		subsampleRatio = image.YCbCrSubsampleRatio422
    31  	case 0x22:
    32  		subsampleRatio = image.YCbCrSubsampleRatio420
    33  	case 0x41:
    34  		subsampleRatio = image.YCbCrSubsampleRatio411
    35  	case 0x42:
    36  		subsampleRatio = image.YCbCrSubsampleRatio410
    37  	default:
    38  		panic("unreachable")
    39  	}
    40  	m := image.NewYCbCr(image.Rect(0, 0, 8*h0*mxx, 8*v0*myy), subsampleRatio)
    41  	d.img3 = m.SubImage(image.Rect(0, 0, d.width, d.height)).(*image.YCbCr)
    42  
    43  	if d.nComp == 4 {
    44  		h3, v3 := d.comp[3].h, d.comp[3].v
    45  		d.blackPix = make([]byte, 8*h3*mxx*8*v3*myy)
    46  		d.blackStride = 8 * h3 * mxx
    47  	}
    48  }
    49  
    50  // Specified in section B.2.3.
    51  func (d *decoder) processSOS(n int) error {
    52  	if d.nComp == 0 {
    53  		return FormatError("missing SOF marker")
    54  	}
    55  	if n < 6 || 4+2*d.nComp < n || n%2 != 0 {
    56  		return FormatError("SOS has wrong length")
    57  	}
    58  	if err := d.readFull(d.tmp[:n]); err != nil {
    59  		return err
    60  	}
    61  	nComp := int(d.tmp[0])
    62  	if n != 4+2*nComp {
    63  		return FormatError("SOS length inconsistent with number of components")
    64  	}
    65  	var scan [maxComponents]struct {
    66  		compIndex uint8
    67  		td        uint8 // DC table selector.
    68  		ta        uint8 // AC table selector.
    69  	}
    70  	totalHV := 0
    71  	for i := 0; i < nComp; i++ {
    72  		cs := d.tmp[1+2*i] // Component selector.
    73  		compIndex := -1
    74  		for j, comp := range d.comp[:d.nComp] {
    75  			if cs == comp.c {
    76  				compIndex = j
    77  			}
    78  		}
    79  		if compIndex < 0 {
    80  			return FormatError("unknown component selector")
    81  		}
    82  		scan[i].compIndex = uint8(compIndex)
    83  		// Section B.2.3 states that "the value of Cs_j shall be different from
    84  		// the values of Cs_1 through Cs_(j-1)". Since we have previously
    85  		// verified that a frame's component identifiers (C_i values in section
    86  		// B.2.2) are unique, it suffices to check that the implicit indexes
    87  		// into d.comp are unique.
    88  		for j := 0; j < i; j++ {
    89  			if scan[i].compIndex == scan[j].compIndex {
    90  				return FormatError("repeated component selector")
    91  			}
    92  		}
    93  		totalHV += d.comp[compIndex].h * d.comp[compIndex].v
    94  
    95  		// The baseline t <= 1 restriction is specified in table B.3.
    96  		scan[i].td = d.tmp[2+2*i] >> 4
    97  		if t := scan[i].td; t > maxTh || (d.baseline && t > 1) {
    98  			return FormatError("bad Td value")
    99  		}
   100  		scan[i].ta = d.tmp[2+2*i] & 0x0f
   101  		if t := scan[i].ta; t > maxTh || (d.baseline && t > 1) {
   102  			return FormatError("bad Ta value")
   103  		}
   104  	}
   105  	// Section B.2.3 states that if there is more than one component then the
   106  	// total H*V values in a scan must be <= 10.
   107  	if d.nComp > 1 && totalHV > 10 {
   108  		return FormatError("total sampling factors too large")
   109  	}
   110  
   111  	// zigStart and zigEnd are the spectral selection bounds.
   112  	// ah and al are the successive approximation high and low values.
   113  	// The spec calls these values Ss, Se, Ah and Al.
   114  	//
   115  	// For progressive JPEGs, these are the two more-or-less independent
   116  	// aspects of progression. Spectral selection progression is when not
   117  	// all of a block's 64 DCT coefficients are transmitted in one pass.
   118  	// For example, three passes could transmit coefficient 0 (the DC
   119  	// component), coefficients 1-5, and coefficients 6-63, in zig-zag
   120  	// order. Successive approximation is when not all of the bits of a
   121  	// band of coefficients are transmitted in one pass. For example,
   122  	// three passes could transmit the 6 most significant bits, followed
   123  	// by the second-least significant bit, followed by the least
   124  	// significant bit.
   125  	//
   126  	// For sequential JPEGs, these parameters are hard-coded to 0/63/0/0, as
   127  	// per table B.3.
   128  	zigStart, zigEnd, ah, al := int32(0), int32(blockSize-1), uint32(0), uint32(0)
   129  	if d.progressive {
   130  		zigStart = int32(d.tmp[1+2*nComp])
   131  		zigEnd = int32(d.tmp[2+2*nComp])
   132  		ah = uint32(d.tmp[3+2*nComp] >> 4)
   133  		al = uint32(d.tmp[3+2*nComp] & 0x0f)
   134  		if (zigStart == 0 && zigEnd != 0) || zigStart > zigEnd || blockSize <= zigEnd {
   135  			return FormatError("bad spectral selection bounds")
   136  		}
   137  		if zigStart != 0 && nComp != 1 {
   138  			return FormatError("progressive AC coefficients for more than one component")
   139  		}
   140  		if ah != 0 && ah != al+1 {
   141  			return FormatError("bad successive approximation values")
   142  		}
   143  	}
   144  
   145  	// mxx and myy are the number of MCUs (Minimum Coded Units) in the image.
   146  	h0, v0 := d.comp[0].h, d.comp[0].v // The h and v values from the Y components.
   147  	mxx := (d.width + 8*h0 - 1) / (8 * h0)
   148  	myy := (d.height + 8*v0 - 1) / (8 * v0)
   149  	if d.img1 == nil && d.img3 == nil {
   150  		d.makeImg(mxx, myy)
   151  	}
   152  	if d.progressive {
   153  		for i := 0; i < nComp; i++ {
   154  			compIndex := scan[i].compIndex
   155  			if d.progCoeffs[compIndex] == nil {
   156  				d.progCoeffs[compIndex] = make([]block, mxx*myy*d.comp[compIndex].h*d.comp[compIndex].v)
   157  			}
   158  		}
   159  	}
   160  
   161  	d.bits = bits{}
   162  	mcu, expectedRST := 0, uint8(rst0Marker)
   163  	var (
   164  		// b is the decoded coefficients, in natural (not zig-zag) order.
   165  		b  block
   166  		dc [maxComponents]int32
   167  		// bx and by are the location of the current block, in units of 8x8
   168  		// blocks: the third block in the first row has (bx, by) = (2, 0).
   169  		bx, by     int
   170  		blockCount int
   171  	)
   172  	for my := 0; my < myy; my++ {
   173  		for mx := 0; mx < mxx; mx++ {
   174  			for i := 0; i < nComp; i++ {
   175  				compIndex := scan[i].compIndex
   176  				hi := d.comp[compIndex].h
   177  				vi := d.comp[compIndex].v
   178  				for j := 0; j < hi*vi; j++ {
   179  					// The blocks are traversed one MCU at a time. For 4:2:0 chroma
   180  					// subsampling, there are four Y 8x8 blocks in every 16x16 MCU.
   181  					//
   182  					// For a sequential 32x16 pixel image, the Y blocks visiting order is:
   183  					//	0 1 4 5
   184  					//	2 3 6 7
   185  					//
   186  					// For progressive images, the interleaved scans (those with nComp > 1)
   187  					// are traversed as above, but non-interleaved scans are traversed left
   188  					// to right, top to bottom:
   189  					//	0 1 2 3
   190  					//	4 5 6 7
   191  					// Only DC scans (zigStart == 0) can be interleaved. AC scans must have
   192  					// only one component.
   193  					//
   194  					// To further complicate matters, for non-interleaved scans, there is no
   195  					// data for any blocks that are inside the image at the MCU level but
   196  					// outside the image at the pixel level. For example, a 24x16 pixel 4:2:0
   197  					// progressive image consists of two 16x16 MCUs. The interleaved scans
   198  					// will process 8 Y blocks:
   199  					//	0 1 4 5
   200  					//	2 3 6 7
   201  					// The non-interleaved scans will process only 6 Y blocks:
   202  					//	0 1 2
   203  					//	3 4 5
   204  					if nComp != 1 {
   205  						bx = hi*mx + j%hi
   206  						by = vi*my + j/hi
   207  					} else {
   208  						q := mxx * hi
   209  						bx = blockCount % q
   210  						by = blockCount / q
   211  						blockCount++
   212  						if bx*8 >= d.width || by*8 >= d.height {
   213  							continue
   214  						}
   215  					}
   216  
   217  					// Load the previous partially decoded coefficients, if applicable.
   218  					if d.progressive {
   219  						b = d.progCoeffs[compIndex][by*mxx*hi+bx]
   220  					} else {
   221  						b = block{}
   222  					}
   223  
   224  					if ah != 0 {
   225  						if err := d.refine(&b, &d.huff[acTable][scan[i].ta], zigStart, zigEnd, 1<<al); err != nil {
   226  							return err
   227  						}
   228  					} else {
   229  						zig := zigStart
   230  						if zig == 0 {
   231  							zig++
   232  							// Decode the DC coefficient, as specified in section F.2.2.1.
   233  							value, err := d.decodeHuffman(&d.huff[dcTable][scan[i].td])
   234  							if err != nil {
   235  								return err
   236  							}
   237  							if value > 16 {
   238  								return UnsupportedError("excessive DC component")
   239  							}
   240  							dcDelta, err := d.receiveExtend(value)
   241  							if err != nil {
   242  								return err
   243  							}
   244  							dc[compIndex] += dcDelta
   245  							b[0] = dc[compIndex] << al
   246  						}
   247  
   248  						if zig <= zigEnd && d.eobRun > 0 {
   249  							d.eobRun--
   250  						} else {
   251  							// Decode the AC coefficients, as specified in section F.2.2.2.
   252  							huff := &d.huff[acTable][scan[i].ta]
   253  							for ; zig <= zigEnd; zig++ {
   254  								value, err := d.decodeHuffman(huff)
   255  								if err != nil {
   256  									return err
   257  								}
   258  								val0 := value >> 4
   259  								val1 := value & 0x0f
   260  								if val1 != 0 {
   261  									zig += int32(val0)
   262  									if zig > zigEnd {
   263  										break
   264  									}
   265  									ac, err := d.receiveExtend(val1)
   266  									if err != nil {
   267  										return err
   268  									}
   269  									b[unzig[zig]] = ac << al
   270  								} else {
   271  									if val0 != 0x0f {
   272  										d.eobRun = uint16(1 << val0)
   273  										if val0 != 0 {
   274  											bits, err := d.decodeBits(int32(val0))
   275  											if err != nil {
   276  												return err
   277  											}
   278  											d.eobRun |= uint16(bits)
   279  										}
   280  										d.eobRun--
   281  										break
   282  									}
   283  									zig += 0x0f
   284  								}
   285  							}
   286  						}
   287  					}
   288  
   289  					if d.progressive {
   290  						// Save the coefficients.
   291  						d.progCoeffs[compIndex][by*mxx*hi+bx] = b
   292  						// At this point, we could call reconstructBlock to dequantize and perform the
   293  						// inverse DCT, to save early stages of a progressive image to the *image.YCbCr
   294  						// buffers (the whole point of progressive encoding), but in Go, the jpeg.Decode
   295  						// function does not return until the entire image is decoded, so we "continue"
   296  						// here to avoid wasted computation. Instead, reconstructBlock is called on each
   297  						// accumulated block by the reconstructProgressiveImage method after all of the
   298  						// SOS markers are processed.
   299  						continue
   300  					}
   301  					if err := d.reconstructBlock(&b, bx, by, int(compIndex)); err != nil {
   302  						return err
   303  					}
   304  				} // for j
   305  			} // for i
   306  			mcu++
   307  			if d.ri > 0 && mcu%d.ri == 0 && mcu < mxx*myy {
   308  				// A more sophisticated decoder could use RST[0-7] markers to resynchronize from corrupt input,
   309  				// but this one assumes well-formed input, and hence the restart marker follows immediately.
   310  				if err := d.readFull(d.tmp[:2]); err != nil {
   311  					return err
   312  				}
   313  
   314  				// Section F.1.2.3 says that "Byte alignment of markers is
   315  				// achieved by padding incomplete bytes with 1-bits. If padding
   316  				// with 1-bits creates a X’FF’ value, a zero byte is stuffed
   317  				// before adding the marker."
   318  				//
   319  				// Seeing "\xff\x00" here is not spec compliant, as we are not
   320  				// expecting an *incomplete* byte (that needed padding). Still,
   321  				// some real world encoders (see golang.org/issue/28717) insert
   322  				// it, so we accept it and re-try the 2 byte read.
   323  				//
   324  				// libjpeg issues a warning (but not an error) for this:
   325  				// https://github.com/LuaDist/libjpeg/blob/6c0fcb8ddee365e7abc4d332662b06900612e923/jdmarker.c#L1041-L1046
   326  				if d.tmp[0] == 0xff && d.tmp[1] == 0x00 {
   327  					if err := d.readFull(d.tmp[:2]); err != nil {
   328  						return err
   329  					}
   330  				}
   331  
   332  				if d.tmp[0] != 0xff || d.tmp[1] != expectedRST {
   333  					return FormatError("bad RST marker")
   334  				}
   335  				expectedRST++
   336  				if expectedRST == rst7Marker+1 {
   337  					expectedRST = rst0Marker
   338  				}
   339  				// Reset the Huffman decoder.
   340  				d.bits = bits{}
   341  				// Reset the DC components, as per section F.2.1.3.1.
   342  				dc = [maxComponents]int32{}
   343  				// Reset the progressive decoder state, as per section G.1.2.2.
   344  				d.eobRun = 0
   345  			}
   346  		} // for mx
   347  	} // for my
   348  
   349  	return nil
   350  }
   351  
   352  // refine decodes a successive approximation refinement block, as specified in
   353  // section G.1.2.
   354  func (d *decoder) refine(b *block, h *huffman, zigStart, zigEnd, delta int32) error {
   355  	// Refining a DC component is trivial.
   356  	if zigStart == 0 {
   357  		if zigEnd != 0 {
   358  			panic("unreachable")
   359  		}
   360  		bit, err := d.decodeBit()
   361  		if err != nil {
   362  			return err
   363  		}
   364  		if bit {
   365  			b[0] |= delta
   366  		}
   367  		return nil
   368  	}
   369  
   370  	// Refining AC components is more complicated; see sections G.1.2.2 and G.1.2.3.
   371  	zig := zigStart
   372  	if d.eobRun == 0 {
   373  	loop:
   374  		for ; zig <= zigEnd; zig++ {
   375  			z := int32(0)
   376  			value, err := d.decodeHuffman(h)
   377  			if err != nil {
   378  				return err
   379  			}
   380  			val0 := value >> 4
   381  			val1 := value & 0x0f
   382  
   383  			switch val1 {
   384  			case 0:
   385  				if val0 != 0x0f {
   386  					d.eobRun = uint16(1 << val0)
   387  					if val0 != 0 {
   388  						bits, err := d.decodeBits(int32(val0))
   389  						if err != nil {
   390  							return err
   391  						}
   392  						d.eobRun |= uint16(bits)
   393  					}
   394  					break loop
   395  				}
   396  			case 1:
   397  				z = delta
   398  				bit, err := d.decodeBit()
   399  				if err != nil {
   400  					return err
   401  				}
   402  				if !bit {
   403  					z = -z
   404  				}
   405  			default:
   406  				return FormatError("unexpected Huffman code")
   407  			}
   408  
   409  			zig, err = d.refineNonZeroes(b, zig, zigEnd, int32(val0), delta)
   410  			if err != nil {
   411  				return err
   412  			}
   413  			if zig > zigEnd {
   414  				return FormatError("too many coefficients")
   415  			}
   416  			if z != 0 {
   417  				b[unzig[zig]] = z
   418  			}
   419  		}
   420  	}
   421  	if d.eobRun > 0 {
   422  		d.eobRun--
   423  		if _, err := d.refineNonZeroes(b, zig, zigEnd, -1, delta); err != nil {
   424  			return err
   425  		}
   426  	}
   427  	return nil
   428  }
   429  
   430  // refineNonZeroes refines non-zero entries of b in zig-zag order. If nz >= 0,
   431  // the first nz zero entries are skipped over.
   432  func (d *decoder) refineNonZeroes(b *block, zig, zigEnd, nz, delta int32) (int32, error) {
   433  	for ; zig <= zigEnd; zig++ {
   434  		u := unzig[zig]
   435  		if b[u] == 0 {
   436  			if nz == 0 {
   437  				break
   438  			}
   439  			nz--
   440  			continue
   441  		}
   442  		bit, err := d.decodeBit()
   443  		if err != nil {
   444  			return 0, err
   445  		}
   446  		if !bit {
   447  			continue
   448  		}
   449  		if b[u] >= 0 {
   450  			b[u] += delta
   451  		} else {
   452  			b[u] -= delta
   453  		}
   454  	}
   455  	return zig, nil
   456  }
   457  
   458  func (d *decoder) reconstructProgressiveImage() error {
   459  	// The h0, mxx, by and bx variables have the same meaning as in the
   460  	// processSOS method.
   461  	h0 := d.comp[0].h
   462  	mxx := (d.width + 8*h0 - 1) / (8 * h0)
   463  	for i := 0; i < d.nComp; i++ {
   464  		if d.progCoeffs[i] == nil {
   465  			continue
   466  		}
   467  		v := 8 * d.comp[0].v / d.comp[i].v
   468  		h := 8 * d.comp[0].h / d.comp[i].h
   469  		stride := mxx * d.comp[i].h
   470  		for by := 0; by*v < d.height; by++ {
   471  			for bx := 0; bx*h < d.width; bx++ {
   472  				if err := d.reconstructBlock(&d.progCoeffs[i][by*stride+bx], bx, by, i); err != nil {
   473  					return err
   474  				}
   475  			}
   476  		}
   477  	}
   478  	return nil
   479  }
   480  
   481  // reconstructBlock dequantizes, performs the inverse DCT and stores the block
   482  // to the image.
   483  func (d *decoder) reconstructBlock(b *block, bx, by, compIndex int) error {
   484  	qt := &d.quant[d.comp[compIndex].tq]
   485  	for zig := 0; zig < blockSize; zig++ {
   486  		b[unzig[zig]] *= qt[zig]
   487  	}
   488  	idct(b)
   489  	dst, stride := []byte(nil), 0
   490  	if d.nComp == 1 {
   491  		dst, stride = d.img1.Pix[8*(by*d.img1.Stride+bx):], d.img1.Stride
   492  	} else {
   493  		switch compIndex {
   494  		case 0:
   495  			dst, stride = d.img3.Y[8*(by*d.img3.YStride+bx):], d.img3.YStride
   496  		case 1:
   497  			dst, stride = d.img3.Cb[8*(by*d.img3.CStride+bx):], d.img3.CStride
   498  		case 2:
   499  			dst, stride = d.img3.Cr[8*(by*d.img3.CStride+bx):], d.img3.CStride
   500  		case 3:
   501  			dst, stride = d.blackPix[8*(by*d.blackStride+bx):], d.blackStride
   502  		default:
   503  			return UnsupportedError("too many components")
   504  		}
   505  	}
   506  	// Level shift by +128, clip to [0, 255], and write to dst.
   507  	for y := 0; y < 8; y++ {
   508  		y8 := y * 8
   509  		yStride := y * stride
   510  		for x := 0; x < 8; x++ {
   511  			c := b[y8+x]
   512  			if c < -128 {
   513  				c = 0
   514  			} else if c > 127 {
   515  				c = 255
   516  			} else {
   517  				c += 128
   518  			}
   519  			dst[yStride+x] = uint8(c)
   520  		}
   521  	}
   522  	return nil
   523  }
   524  

View as plain text